Netgear wndr3300 setup

Ask the Community. Need to Contact Support? See Support Options. Contact Support. Select a product or category below for specific instructions. N Routers. Nighthawk Routers. Powerline and Wall Plug Extenders. Wireless Access Points.

Otherwise, for the same price, we'd recommend the 2. The button also activates the router's Wi-Fi Protected Setup WPS feature, which instigates a short window of time wherein other WPS-compliant clients can enter the network without having to manually enter the encryption code. We like the blue light emitted from the button, but also found it a little too bright for certain locations, such as your bedroom, or beneath a television if you want to watch a film in a darkened room.

In this case, you might want to cover it with a piece of black duck tape, as you cannot turn it off. The best design feature of the router is its internal antenna, which helps make the router compact, though not as compact as the design of the latest Linksys routers, such as the WRT The WNDR can also work in a vertical position and comes equipped with a base for just this purpose.

It is, however, not wall-mountable. The WNDR is very easy to set up. The router comes with a software application that walks you through the setup process step by step, from setting up the hardware to creating the wireless network. If this is so, it prompts you to pick the one that's currently connected to the router; and if you pick the wrong one, you can go back and pick another.

This is a significant move, because traditionally most routers both Wireless-G and Draft N were made to operate in the 2. With the proliferation of wireless networking in the last couple of years, the chances are that if you live in a city the 2. Yes, it is possible for you to setup the WNDR as a wireless repeater or as an access point. You may refer to the link below for the steps on how to set it up as a wireless repeater will not require to hard wire WNDR to the R You may also setup the router as an access point will require Ethernet cable connected from the R going to the WNDR if you prefer this setup.

You may follow the steps below. We are investigating this as the highest priority and will provide updates at Status. Join Now Log In Help. All forum topics Previous Topic Next Topic. Setting up a repeater. View solution in original post. Set up your Netgaer router as an Access Point. Log into the netgear router and disable DHCP leave wireless radios enabled. Give it a static IP in the To be safe, don't use Ip address If you can't run Ethernet, consider purchasing powerline device to provide connectivity between BT and Netgear devices.

Thanks netwrks We are half way there. A little bit of confusion BT Homehub on Given it a static IP of